The following list describes the Quality Control format (DPS preface used) Type X (1= Skymap data, 2=Velocity data, 3=Quality Control, 4=GDDAV Dist.Spectrum, 5=GDDAV Velocity data) | Version (DDA, GDDA) X.X | | Year YY | | | Day DDD | | | | Hour HH | | | | | Minute MM | | | | | | Second SS | | | | | | | Active schedule s | | | | | | | |Program Numbers p | | | | | | | ||DPS Drift format flags FF | | | | | | | ||| Journal J | | | | | | | ||| |First Height of 10's of km | | | | | | | ||| ||Height Resolution (km) as stored on disk file H | | | | | | | ||| |||No of Heights (Upper 4-bits only in *.dft file format) | | | | | | | ||| ||||Nominal (1st) Frequency FFFFFF | | | | | | | ||| ||||| Disk file Type (0ah = drift) D | | | | | | | ||| ||||| |Bits 4-7 (MSB) of Small Steps P | | | | | | | ||| ||||| ||Bits 0-3 (LSB) od small steps | | | | | | | ||| ||||| |||Fine Frequency Steps (10's of KHz) F | | | | | | | ||| ||||| ||||No of Small Steps, absolute value of S | | | | | | | ||| ||||| |||||Lower nibble of signed S, Sl | | | | | | | ||| ||||| ||||||Upper nibble of signed S, Su | | | | | | | ||| ||||| |||||||Start Frequency in MHz LL | | | | | | | ||| ||||| |||||||| Coarse step (100kHz) or No of CIT's, C | | | | | | | ||| ||||| |||||||| |Upper Frequency (MHz), UU | | | | | | | ||| ||||| |||||||| || Bottom, Top, Heights saved, B | | | | | | | ||| ||||| |||||||| || | Station ID (latitude), VVV | | | | | | | ||| ||||| |||||||| || | | Waveform (1= complementary), X | | | | | | | ||| ||||| |||||||| || | | |Number of antennas ( 1 or 4), A | | | | | | | ||| ||||| |||||||| || | | ||Fine Step (10 kHz), F | | | | | | | ||| ||||| |||||||| || | | |||Doppler Spacing, d | | | | | | | ||| ||||| |||||||| || | | ||||No of Doppler lines, 2**N | | | | | | | ||| ||||| |||||||| || | | |||||Sampling Rate (0=50, 2=100, 3=200 Hz), R | | | | | | | ||| ||||| |||||||| || | | ||||||Spectral Window (4=Hanning), w | | | | | | | ||| ||||| |||||||| || | | |||||||Time Offset (50 microsec increments), k | | | | | | | ||| ||||| |||||||| || | | ||||||||Frequency correction, f | | | | | | | ||| ||||| |||||||| || | | |||||||||Gain Correction, g | | | | | | | ||| ||||| |||||||| || | | ||||||||||No of Heights stored per frequency, o | | | | | | | ||| ||||| |||||||| || | | |||||||||||Spare (Blank) | | | | | | | ||| ||||| |||||||| || | | ||||||||||||Frequency Search, I | | | | | | | ||| ||||| |||||||| || | | |||||||||||||Nominal (or Base) Gain, G | | | | | | | ||| ||||| |||||||| || | | |||||||||||||| 3 4.2 9423808471907FE2958038000A1504400380325802514017310008019 1 0 0249 0 0 0 0 0 0 0 0 1 0 2 1 0 0 0 21 3 4.2 9429412554527FE6958029000A1A04400240206012524027210000118 2 0 0249 0 0 0 0 0 0 0 0 1 2 3 2 0 0 0 27 3 4.2 9429415093517FE6958023000A1A04400240206012524027210000118 3 0 0249 0 -2 -2 -1 0 0 0 0 1 3 6 6 0 0 0 13 3 4.2 9429417252817FE2958028000A1A04400240206012524027210000118 4 0 0249 0 -5 -6 -5 0 0 0 0 1 3 5 8 0 0 0 7 3 4.2 9429419411217FE2958019000A1A04400140106012524027210000118 5 0 0249 0 -3 -3 -2 0 0 0 0 1 2 4 5 0 0 0 4 3 4.2 9429421553017FE6958021000A1A04400240206012524027210000118 6 0 0249 0 -7 -7 -6 0 0 0 0 3 2 6 11 0 0 0 2 3 4.2 9429500111217FE2958044000A1A04400440406012524027210000118 7 0 0249 0 0 -1 -1 0 0 0 0 1 2 8 10 0 0 0 3 3 4.2 9429502275627FE3958057000A1A04400540506012524027210000118 8 0 0249 0 0 0 0 0 0 0 0 1 2 6 6 0 0 0 6 3 4.2 9429504554427FE7958077000A1A04400740706012524027210000118 9 0 0249 0 -1 -1 -1 0 0 0 0 1 2 6 9 0 0 0 4 | | | | | | | | | | | | | | | | | | | No of QC Statistics (DDA) | | | | | | | | | | | | | | | | | | Spare (blanks) XXXXX DDA | | | | | | | | | | | | | | | | | Geographic latitude to 10/th decimal place DDA, GEO | | | | | | | | | | | | | | | | QC Phase Failure/Correction. Ant.1 | | | | | | | | | | | | | | | QC Phase F/C. Ant.2 | | | | | | | | | | | | | | QC Phase F/C. Ant.3 | | | | | | | | | | | | | QC Phase F/C. Ant.4 | | | | | | | | | | | | QC Phase F/C. Ant.5 | | | | | | | | | | | QC Phase F/C. Ant.6 | | | | | | | | | | QC Phase F/C. Ant.7 | | | | | | | | | Spare | | | | | | | | QC Amplitude F. Ant.1 | | | | | | | QC Amplitude F. Ant.2 | | | | | | QC Amplitude F. Ant.3 | | | | | QC Amplitude F. Ant.4 | | | | QC Amplitude F. Ant.5 | | | QC Amplitude F. Ant.6 | | QC Amplitude F. Ant.7 | Amplitude Independence test